If you own property in Beaver, you are sitting on one of the best groundwater situations in southern Utah. The Beaver Valley aquifer is highly productive, the water is cold and clean, and the depths are moderate — which together make Beaver one of the most cost-effective places we drill. This guide explains why, and what to expect for your home, farm, or ranch.
Langford Drilling serves all of Beaver and Beaver County, from residential neighborhoods in town to the farms along the valley floor and ranches reaching up into the Tushar foothills.
Why Beaver Has Such Good Water
The Tushar Mountains east of town are the highest range in southern Utah, with peaks above 12,000 feet. All that snowpack melts and recharges a productive alluvial aquifer beneath the valley. The result is water with low mineral content and the cold temperatures typical of mountain-fed systems — good enough for most homes and farms without treatment.
-
Strong recharge from Tushar Mountain snowmelt keeps the aquifer productive year over year.
-
Thick alluvial deposits over volcanic bedrock create aquifer zones with excellent flow, so wells produce well.
-
Straightforward geology means efficient drilling and fewer surprises than red-rock plateau areas.
Typical Depths and Costs in Beaver
Most residential wells in Beaver run 150 to 400 feet. Properties closer to Beaver Creek often reach water on the shallow end of that range. Because depths are moderate and the geology cooperates, residential well projects in Beaver are frequently among the most affordable in the region.
- Typical residential depth150-400 ft
- Water qualityCold, low mineral, excellent
- Recharge sourceTushar Mountain snowmelt
- Common well typesDomestic, irrigation, livestock
For a full breakdown of what drives the final number on any Utah well, see how much well drilling costs in Utah.
Farm and Ranch Wells in Beaver Valley
Beaver County's economy runs on alfalfa, grain, hay, and cattle, and a lot of that depends on reliable irrigation and livestock-watering wells. High-capacity agricultural wells are a different animal than a house well — bigger casing, bigger pumps, and careful matching of yield to your acreage. If you are planning one, our guide on preparing for an agricultural irrigation well walks through what to think about first. Keep in mind that the Milford bench area west of Beaver has tighter rules for ag wells, so basin status matters.
Permits and Water Rights
Beaver Valley has mixed water availability — better than the closed basins to the north, but not wide open. Most new wells still go through a change application on an existing right rather than a brand-new appropriation. Our complete walkthrough is in how to get a water rights permit for a well in Utah. We will not move the rig without a current Start Card on file.
Beaver Well Drilling FAQ
Who is the best well driller near me in Beaver?
Langford Drilling has deep experience with the Beaver Valley aquifer and Tushar Mountain geology, and we serve the whole county. When you search for a well driller near you in Beaver, we are one of the most experienced local options.
How deep are wells in Beaver?
Residential wells usually run 150 to 400 feet. Properties near Beaver Creek often hit water shallower; agricultural wells may go deeper to support the volume a farm needs.
Is Beaver well water good quality?
Yes. Beaver has a reputation for some of the best well water in southern Utah — clean, cold, and low in minerals thanks to mountain recharge. We still recommend testing after drilling.
Can you drill irrigation wells for Beaver County farms?
Absolutely. We design high-capacity wells for alfalfa, grain, hay, and livestock operations throughout Beaver Valley, sized to your acreage and water rights.
Get a Free Estimate in Beaver
Whether it is a house well or a high-capacity ag well, we will give you an honest assessment and a free written estimate. Call 435-233-8954, explore our agricultural well drilling service, or visit our Beaver service page.